Adding Turkish in Xcode

Dependencies/rileylink_ios/MinimedKit/tr.lproj/Localizable.strings

@@ -0,0 +1,98 @@
+/* Communications error for a bolus currently running */
+"A bolus is already in progress" = "A bolus is already in progress";
+
+/* The description of AlarmClockReminderPumpEvent */
+"AlarmClockReminder" = "AlarmClockReminder";
+
+/* The description of AlarmSensorPumpEvent */
+"AlarmSensor" = "AlarmSensor";
+
+/* Describing the battery chemistry as Alkaline */
+"Alkaline" = "Alkaline";
+
+/* The format string description of a BasalProfileStartPumpEvent. (1: The index of the profile)(2: The basal rate) */
+"Basal Profile %1$@: %2$@ U/hour" = "Basal Profile %1$@: %2$@ U/hour";
+
+/* Pump error code when bolus is in progress */
+"Bolus in progress" = "Bolus in progress";
+
+/* Suggestions for diagnosing a command refused pump error */
+"Check that the pump is not suspended or priming, or has a percent temp basal type" = "Check that the pump is not suspended or priming, or has a percent temp basal type";
+
+/* Pump error code returned when command refused */
+"Command refused" = "Command refused";
+
+/* No comment provided by engineer. */
+"Comms with another pump detected" = "Comms with another pump detected.";
+
+/* Error description */
+"Decoding Error" = "Decoding Error";
+
+/* Error description */
+"Device Error" = "Device Error";
+
+/* Describing the pump history insulin data source */
+"Event History" = "Event History";
+
+/* Format string for failure reason. (1: The operation being performed) (2: The response data) */
+"Invalid response during %1$@: %2$@" = "Invalid response during %1$@: %2$@";
+
+/* Describing the battery chemistry as Lithium */
+"Lithium" = "Lithium";
+
+/* Recovery suggestion */
+"Make sure your RileyLink is nearby and powered on" = "Make sure your RileyLink is nearby and powered on";
+
+/* Pump error code describing max setting exceeded */
+"Max setting exceeded" = "Max setting exceeded";
+
+/* Pump title (1: model number) */
+"Minimed %@" = "Minimed %@";
+
+/* Generic title of the minimed pump manager */
+"Minimed 500/700 Series" = "Minimed 500/700 Series";
+
+/* Describing the North America pump region */
+"North America" = "North America";
+
+/* No comment provided by engineer. */
+"Pump did not respond" = "Pump did not respond";
+
+/* Error description */
+"Pump Error" = "Pump Error";
+
+/* No comment provided by engineer. */
+"Pump is suspended" = "Pump is suspended";
+
+/* No comment provided by engineer. */
+"Pump responded unexpectedly" = "Pump responded unexpectedly";
+
+/* The format string describing a pump message. (1: The packet type)(2: The message type)(3: The message address)(4: The message data */
+"PumpMessage(%1$@, %2$@, %3$@, %4$@)" = "PumpMessage(%1$@, %2$@, %3$@, %4$@)";
+
+/* Describing the reservoir insulin data source */
+"Reservoir" = "Reservoir";
+
+/* Error description */
+"RileyLink radio tune failed" = "RileyLink radio tune failed";
+
+/* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in minutes) */
+"Temporary Basal: %1$.3f U/hour" = "Temporary Basal: %1$.3f U/hour";
+
+/* The format string description of a TempBasalDurationPumpEvent. (1: The duration of the temp basal in minutes) */
+"Temporary Basal: %1$d min" = "Temporary Basal: %1$d min";
+
+/* The format string description of a TempBasalPumpEvent. (1: The rate of the temp basal in percent) */
+"Temporary Basal: %1$d%%" = "Temporary Basal: %1$d%%";
+
+/* The format string description of an unknown pump error code. (1: The specific error code raw value) */
+"Unknown pump error code: %1$@" = "Unknown pump error code: %1$@";
+
+/* No comment provided by engineer. */
+"Unknown pump model: %@" = "Unknown pump model: %@";
+
+/* Format string for an unknown response. (1: The operation being performed) (2: The response data) */
+"Unknown response during %1$@: %2$@" = "Unknown response during %1$@: %2$@";
+
+/* Describing the worldwide pump region */
+"World-Wide" = "World-Wide";

Dependencies/rileylink_ios/MinimedKitUI/tr.lproj/MinimedPumpManager.strings

@@ -0,0 +1,69 @@
+
+/* Class = "UITableViewController"; title = "RileyLink Setup"; ObjectID = "0MV-2k-Dty"; */
+"0MV-2k-Dty.title" = "RileyLink Setup";
+
+/* Class = "UILabel"; text = "Find Device"; ObjectID = "1fp-45-qWK"; */
+"1fp-45-qWK.text" = "Find Device";
+
+/* Class = "UILabel"; text = "Other Devices"; ObjectID = "A6i-Cb-baR"; */
+"A6i-Cb-baR.text" = "Other Devices";
+
+/* Class = "UILabel"; text = "Do not change the time using your pumpʼs menu."; ObjectID = "Bdb-j4-WcR"; */
+"Bdb-j4-WcR.text" = "Do not change the time using your pumpʼs menu.";
+
+/* Class = "UITableViewController"; title = "Pump Clock"; ObjectID = "Fps-h3-V4K"; */
+"Fps-h3-V4K.title" = "Pump Clock";
+
+/* Class = "UITextField"; placeholder = "Enter the 6-digit pump ID"; ObjectID = "HeG-VF-L5P"; */
+"HeG-VF-L5P.placeholder" = "Enter the 6-digit pump ID";
+
+/* Class = "UILabel"; text = "If you travel to a different time zone for an extended period of time, you can change the pumpʼs time zone at any time in Loopʼs Settings screen."; ObjectID = "HuY-fE-vM8"; */
+"HuY-fE-vM8.text" = "If you travel to a different time zone for an extended period of time, you can change the pumpʼs time zone at any time in Loopʼs Settings screen.";
+
+/* Class = "UILabel"; text = "Loop will keep your pumpʼs clock synchronized with your phone in the time zone youʼre in now."; ObjectID = "IQ5-53-x9s"; */
+"IQ5-53-x9s.text" = "Loop will keep your pumpʼs clock synchronized with your phone in the time zone youʼre in now.";
+
+/* Class = "UITableViewController"; title = "Setup Complete"; ObjectID = "Nwf-TJ-KmJ"; */
+"Nwf-TJ-KmJ.title" = "Setup Complete";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "OZk-Db-KCs"; */
+"OZk-Db-KCs.title" = "Pump Setup";
+
+/* Class = "UINavigationItem"; title = "Pump Setup"; ObjectID = "V47-Nq-7ew"; */
+"V47-Nq-7ew.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; headerTitle = "Main Menu"; ObjectID = "ZnF-zy-5gR"; */
+"ZnF-zy-5gR.headerTitle" = "Main Menu";
+
+/* Class = "UILabel"; text = "Utilities"; ObjectID = "c7t-pZ-WqY"; */
+"c7t-pZ-WqY.text" = "Utilities";
+
+/* Class = "UILabel"; text = "Connect Devices"; ObjectID = "erq-yb-anx"; */
+"erq-yb-anx.text" = "Connect Devices";
+
+/* Class = "UITableViewSection"; footerTitle = "The pump ID is the 6-digit numerical portion of the serial number (labeled as SN or S/N)."; ObjectID = "fVG-pl-jT9"; */
+"fVG-pl-jT9.footerTitle" = "The pump ID is the 6-digit numerical portion of the serial number (labeled as SN or S/N).";
+
+/* Class = "UITableViewSection"; headerTitle = "Pump ID"; ObjectID = "fVG-pl-jT9"; */
+"fVG-pl-jT9.headerTitle" = "Pump ID";
+
+/* Class = "UILabel"; text = "Your pump is ready for use."; ObjectID = "g1m-3k-XI3"; */
+"g1m-3k-XI3.text" = "Your pump is ready for use.";
+
+/* Class = "UITableViewSection"; footerTitle = "The pump region and color are denoted as the last 3 letters of the the model number (labeled as REF)."; ObjectID = "lGI-LD-xR7"; */
+"lGI-LD-xR7.footerTitle" = "The pump region and color are denoted as the last 3 letters of the the model number (labeled as REF).";
+
+/* Class = "UITableViewSection"; headerTitle = "Region and Color"; ObjectID = "lGI-LD-xR7"; */
+"lGI-LD-xR7.headerTitle" = "Region and Color";
+
+/* Class = "UITableViewController"; title = "Pump Broadcasts"; ObjectID = "oBL-lh-SHI"; */
+"oBL-lh-SHI.title" = "Pump Broadcasts";
+
+/* Class = "UILabel"; text = "On"; ObjectID = "ojQ-ob-gBx"; */
+"ojQ-ob-gBx.text" = "On";
+
+/* Class = "UILabel"; text = "Enter the pump region"; ObjectID = "tGa-FP-JqD"; */
+"tGa-FP-JqD.text" = "Enter the pump region";
+
+/* Class = "UILabel"; text = "Loop will listen for status messages sent by your pump. Follow the steps below on your pump to enable these messages:"; ObjectID = "yLn-Ya-p1R"; */
+"yLn-Ya-p1R.text" = "Loop will listen for status messages sent by your pump. Follow the steps below on your pump to enable these messages:";

Dependencies/rileylink_ios/OmniKit/tr.lproj/Localizable.strings

@@ -0,0 +1,178 @@
+/* Description for auto-off alarm */
+"Auto-off alarm" = "Auto-off alarm";
+
+/* Pod state when running below fifty units */
+"Below 50 units" = "Below 50 units";
+
+/* Error message shown when operation could not be completed due to existing bolus in progress */
+"Bolus in progress" = "Bolus in progress";
+
+/* The format string describing a bolus. (1: The amount delivered)(2: Start time of the dose)(3: duration)(4: scheduled certainty) */
+"Bolus: %1$@U %2$@ %3$@ %4$@" = "Bolus: %1$@U %2$@ %3$@ %4$@";
+
+/* Delivery status when bolusing */
+"Bolusing" = "Bolusing";
+
+/* Delivery status when bolusing and temp basal is running */
+"Bolusing with temp basal" = "Bolusing with temp basal";
+
+/* Pod state when inserting cannula */
+"Cannula inserting" = "Cannula inserting";
+
+/* String describing a dose that was certainly scheduled */
+"Certain" = "Certain";
+
+/* Pod state when pod has been deactivated */
+"Deactivated" = "Deactivated";
+
+/* Description for Empty reservoir pod fault */
+"Empty reservoir" = "Empty reservoir";
+
+/* Error message shown when empty response from pod was received */
+"Empty response from pod" = "Empty response from pod";
+
+/* Pod state error event logged shutting down */
+"Error event logged, shutting down" = "Error event logged, shutting down";
+
+/* Description for expiration alert */
+"Expiration alert" = "Expiration alert";
+
+/* Description for finish setup */
+"Finish setup " = "Finish setup ";
+
+/* Pod inititialized */
+"Initialized" = "Initialized";
+
+/* The format string for Internal pod fault (1: The fault code value) */
+"Internal pod fault %1$03d" = "Internal pod fault %1$03d";
+
+/* The format string describing a bolus that was interrupted. (1: The amount delivered)(2: The amount scheduled)(3: Start time of the dose)(4: duration)(5: scheduled certainty) */
+"InterruptedBolus: %1$@ U (%2$@ U scheduled) %3$@ %4$@ %5$@" = "InterruptedBolus: %1$@ U (%2$@ U scheduled) %3$@ %4$@ %5$@";
+
+/* Description for low reservoir alarm */
+"Low reservoir advisory alarm" = "Low reservoir advisory alarm";
+
+/* Recovery suggestion when no RileyLink is available */
+"Make sure your RileyLink is nearby and powered on" = "Make sure your RileyLink is nearby and powered on";
+
+/* Pod alert state when no alerts are active */
+"No alerts" = "No alerts";
+
+/* Error message shown when no pod is paired */
+"No pod paired" = "No pod paired";
+
+/* Error message shown when no response from pod was received */
+"No response from pod" = "No response from pod";
+
+/* Error message shown when no response from pod was received */
+"No RileyLink available" = "No RileyLink available";
+
+/* Delivery status when basal is running
+   Pod state when running above fifty units */
+"Normal" = "Normal";
+
+/* Description for Occlusion detected pod fault */
+"Occlusion detected" = "Occlusion detected";
+
+/* Generic title of the omnipod pump manager */
+"Omnipod" = "Omnipod";
+
+/* Pod status after pairing */
+"Paired" = "Paired";
+
+/* Recovery suggestion when no response is received from pod */
+"Please bring your pod closer to the RileyLink and try again" = "Please bring your pod closer to the RileyLink and try again";
+
+/* Recover suggestion shown when no pod is paired */
+"Please pair a new pod" = "Please pair a new pod";
+
+/* Error message shown when user cannot pair because pod is already paired */
+"Pod already paired" = "Pod already paired";
+
+/* Error message shown when prime is attempted, but pod is already primed */
+"Pod already primed" = "Pod already primed";
+
+/* Description for expiration advisory alarm */
+"Pod expiration advisory alarm" = "Pod expiration advisory alarm";
+
+/* The title for pod expiration notification */
+"Pod Expiration Notice" = "Pod Expiration Notice";
+
+/* Description for Pod expired pod fault */
+"Pod expired" = "Pod expired";
+
+/* Format string for pod fault code */
+"Pod Fault: %1$@" = "Pod Fault: %1$@";
+
+/* Error message when cannula insertion fails because the pod is in an unexpected state */
+"Pod is not in a state ready for cannula insertion." = "Pod is not in a state ready for cannula insertion.";
+
+/* Error message when prime fails because the pod is in an unexpected state */
+"Pod is not in a state ready for priming." = "Pod is not in a state ready for priming.";
+
+/* Error message action could not be performed because pod is suspended */
+"Pod is suspended" = "Pod is suspended";
+
+/* Pod state when prime or cannula insertion has not completed in the time allotted */
+"Pod setup window expired" = "Pod setup window expired";
+
+/* Delivery status when pod is priming
+   Pod status when priming */
+"Priming" = "Priming";
+
+/* Pod state when ready for basal programming */
+"Ready for basal programming" = "Ready for basal programming";
+
+/* Pod state when ready for cannula insertion */
+"Ready to insert cannula" = "Ready to insert cannula";
+
+/* The format string describing a resume. (1: Time)(2: Scheduled certainty */
+"Resume: %1$@ %2$@" = "Resume: %1$@ %2$@";
+
+/* Delivery status when basal is running */
+"Scheduled Basal" = "Scheduled Basal";
+
+/* Description for shutdown imminent alarm */
+"Shutdown imminent alarm" = "Shutdown imminent alarm";
+
+/* The format string describing a suspend. (1: Time)(2: Scheduled certainty */
+"Suspend: %1$@ %2$@" = "Suspend: %1$@ %2$@";
+
+/* Delivery status when insulin delivery is suspended */
+"Suspended" = "Suspended";
+
+/* Pod tank fill completed */
+"Tank fill completed" = "Tank fill completed";
+
+/* Pod power to motor activated */
+"Tank power activated" = "Tank power activated";
+
+/* Error message shown when temp basal could not be set due to existing temp basal in progress */
+"Temp basal in progress" = "Temp basal in progress";
+
+/* Delivery status when temp basal is running */
+"Temp basal running" = "Temp basal running";
+
+/* The format string describing a temp basal. (1: The rate)(2: Start time)(3: duration)(4: volume)(5: scheduled certainty */
+"TempBasal: %1$@ U/hour %2$@ %3$@ %4$@ U %5$@" = "TempBasal: %1$@ U/hour %2$@ %3$@ %4$@ U %5$@";
+
+/* The format string for pod expiration notification body (1: time until expiration) */
+"Time to replace your pod! Your pod will expire in %1$@" = "Time to replace your pod! Your pod will expire in %1$@";
+
+/* String describing a dose that was possibly scheduled */
+"Uncertain" = "Uncertain";
+
+/* Error message shown when empty response from pod was received */
+"Unexpected response from pod" = "Unexpected response from pod";
+
+/* The format string for Unknown pod fault (1: The fault code value) */
+"Unknown pod fault %1$03d" = "Unknown pod fault %1$03d";
+
+/* Recovery suggestion when operation could not be completed due to existing bolus in progress */
+"Wait for existing bolus to finish, or cancel bolus" = "Wait for existing bolus to finish, or cancel bolus";
+
+/* Recovery suggestion when operation could not be completed due to existing temp basal in progress */
+"Wait for existing temp basal to finish, or suspend to cancel" = "Wait for existing temp basal to finish, or suspend to cancel";
+
+/* Description waiting for pairing reminder */
+"Waiting for pairing reminder" = "Waiting for pairing reminder";

Dependencies/rileylink_ios/OmniKitPacketParser/tr.lproj/Localizable.strings

@@ -0,0 +1,178 @@
+/* Description for auto-off alarm */
+"Auto-off alarm" = "Auto-off alarm";
+
+/* Pod state when running below fifty units */
+"Below 50 units" = "Below 50 units";
+
+/* Error message shown when operation could not be completed due to existing bolus in progress */
+"Bolus in progress" = "Bolus in progress";
+
+/* The format string describing a bolus. (1: The amount delivered)(2: Start time of the dose)(3: duration)(4: scheduled certainty) */
+"Bolus: %1$@U %2$@ %3$@ %4$@" = "Bolus: %1$@U %2$@ %3$@ %4$@";
+
+/* Delivery status when bolusing */
+"Bolusing" = "Bolusing";
+
+/* Delivery status when bolusing and temp basal is running */
+"Bolusing with temp basal" = "Bolusing with temp basal";
+
+/* Pod state when inserting cannula */
+"Cannula inserting" = "Cannula inserting";
+
+/* String describing a dose that was certainly scheduled */
+"Certain" = "Certain";
+
+/* Pod state when pod has been deactivated */
+"Deactivated" = "Deactivated";
+
+/* Description for Empty reservoir pod fault */
+"Empty reservoir" = "Empty reservoir";
+
+/* Error message shown when empty response from pod was received */
+"Empty response from pod" = "Empty response from pod";
+
+/* Pod state error event logged shutting down */
+"Error event logged, shutting down" = "Error event logged, shutting down";
+
+/* Description for expiration alert */
+"Expiration alert" = "Expiration alert";
+
+/* Description for finish setup */
+"Finish setup " = "Finish setup ";
+
+/* Pod inititialized */
+"Initialized" = "Initialized";
+
+/* The format string for Internal pod fault (1: The fault code value) */
+"Internal pod fault %1$03d" = "Internal pod fault %1$03d";
+
+/* The format string describing a bolus that was interrupted. (1: The amount delivered)(2: The amount scheduled)(3: Start time of the dose)(4: duration)(5: scheduled certainty) */
+"InterruptedBolus: %1$@ U (%2$@ U scheduled) %3$@ %4$@ %5$@" = "InterruptedBolus: %1$@ U (%2$@ U scheduled) %3$@ %4$@ %5$@";
+
+/* Description for low reservoir alarm */
+"Low reservoir advisory alarm" = "Low reservoir advisory alarm";
+
+/* Recovery suggestion when no RileyLink is available */
+"Make sure your RileyLink is nearby and powered on" = "Make sure your RileyLink is nearby and powered on";
+
+/* Pod alert state when no alerts are active */
+"No alerts" = "No alerts";
+
+/* Error message shown when no pod is paired */
+"No pod paired" = "No pod paired";
+
+/* Error message shown when no response from pod was received */
+"No response from pod" = "No response from pod";
+
+/* Error message shown when no response from pod was received */
+"No RileyLink available" = "No RileyLink available";
+
+/* Delivery status when basal is running
+   Pod state when running above fifty units */
+"Normal" = "Normal";
+
+/* Description for Occlusion detected pod fault */
+"Occlusion detected" = "Occlusion detected";
+
+/* Generic title of the omnipod pump manager */
+"Omnipod" = "Omnipod";
+
+/* Pod status after pairing */
+"Paired" = "Paired";
+
+/* Recovery suggestion when no response is received from pod */
+"Please bring your pod closer to the RileyLink and try again" = "Please bring your pod closer to the RileyLink and try again";
+
+/* Recover suggestion shown when no pod is paired */
+"Please pair a new pod" = "Please pair a new pod";
+
+/* Error message shown when user cannot pair because pod is already paired */
+"Pod already paired" = "Pod already paired";
+
+/* Error message shown when prime is attempted, but pod is already primed */
+"Pod already primed" = "Pod already primed";
+
+/* Description for expiration advisory alarm */
+"Pod expiration advisory alarm" = "Pod expiration advisory alarm";
+
+/* The title for pod expiration notification */
+"Pod Expiration Notice" = "Pod Expiration Notice";
+
+/* Description for Pod expired pod fault */
+"Pod expired" = "Pod expired";
+
+/* Format string for pod fault code */
+"Pod Fault: %1$@" = "Pod Fault: %1$@";
+
+/* Error message when cannula insertion fails because the pod is in an unexpected state */
+"Pod is not in a state ready for cannula insertion." = "Pod is not in a state ready for cannula insertion.";
+
+/* Error message when prime fails because the pod is in an unexpected state */
+"Pod is not in a state ready for priming." = "Pod is not in a state ready for priming.";
+
+/* Error message action could not be performed because pod is suspended */
+"Pod is suspended" = "Pod is suspended";
+
+/* Pod state when prime or cannula insertion has not completed in the time allotted */
+"Pod setup window expired" = "Pod setup window expired";
+
+/* Delivery status when pod is priming
+   Pod status when priming */
+"Priming" = "Priming";
+
+/* Pod state when ready for basal programming */
+"Ready for basal programming" = "Ready for basal programming";
+
+/* Pod state when ready for cannula insertion */
+"Ready to insert cannula" = "Ready to insert cannula";
+
+/* The format string describing a resume. (1: Time)(2: Scheduled certainty */
+"Resume: %1$@ %2$@" = "Resume: %1$@ %2$@";
+
+/* Delivery status when basal is running */
+"Scheduled Basal" = "Scheduled Basal";
+
+/* Description for shutdown imminent alarm */
+"Shutdown imminent alarm" = "Shutdown imminent alarm";
+
+/* The format string describing a suspend. (1: Time)(2: Scheduled certainty */
+"Suspend: %1$@ %2$@" = "Suspend: %1$@ %2$@";
+
+/* Delivery status when insulin delivery is suspended */
+"Suspended" = "Suspended";
+
+/* Pod tank fill completed */
+"Tank fill completed" = "Tank fill completed";
+
+/* Pod power to motor activated */
+"Tank power activated" = "Tank power activated";
+
+/* Error message shown when temp basal could not be set due to existing temp basal in progress */
+"Temp basal in progress" = "Temp basal in progress";
+
+/* Delivery status when temp basal is running */
+"Temp basal running" = "Temp basal running";
+
+/* The format string describing a temp basal. (1: The rate)(2: Start time)(3: duration)(4: volume)(5: scheduled certainty */
+"TempBasal: %1$@ U/hour %2$@ %3$@ %4$@ U %5$@" = "TempBasal: %1$@ U/hour %2$@ %3$@ %4$@ U %5$@";
+
+/* The format string for pod expiration notification body (1: time until expiration) */
+"Time to replace your pod! Your pod will expire in %1$@" = "Time to replace your pod! Your pod will expire in %1$@";
+
+/* String describing a dose that was possibly scheduled */
+"Uncertain" = "Uncertain";
+
+/* Error message shown when empty response from pod was received */
+"Unexpected response from pod" = "Unexpected response from pod";
+
+/* The format string for Unknown pod fault (1: The fault code value) */
+"Unknown pod fault %1$03d" = "Unknown pod fault %1$03d";
+
+/* Recovery suggestion when operation could not be completed due to existing bolus in progress */
+"Wait for existing bolus to finish, or cancel bolus" = "Wait for existing bolus to finish, or cancel bolus";
+
+/* Recovery suggestion when operation could not be completed due to existing temp basal in progress */
+"Wait for existing temp basal to finish, or suspend to cancel" = "Wait for existing temp basal to finish, or suspend to cancel";
+
+/* Description waiting for pairing reminder */
+"Waiting for pairing reminder" = "Waiting for pairing reminder";

Dependencies/rileylink_ios/OmniKitUI/tr.lproj/OmnipodPumpManager.strings

@@ -0,0 +1,63 @@
+
+/* Class = "UITableViewSection"; headerTitle = "Remove POD"; ObjectID = "1LF-te-Bdd"; */
+"1LF-te-Bdd.headerTitle" = "Remove POD";
+
+/* Class = "UINavigationItem"; title = "RileyLink Setup"; ObjectID = "3HH-eJ-lRh"; */
+"3HH-eJ-lRh.title" = "RileyLink Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "91O-Un-vKc"; */
+"91O-Un-vKc.title" = "Pump Setup";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: Do not remove the pod's needle cap at this time."; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.footerTitle" = "NOTE: Do not remove the pod's needle cap at this time.";
+
+/* Class = "UITableViewSection"; headerTitle = "Prepare Pod"; ObjectID = "EUt-xk-Rmp"; */
+"EUt-xk-Rmp.headerTitle" = "Prepare Pod";
+
+/* Class = "UILabel"; text = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you."; ObjectID = "Eng-IY-fQ7"; */
+"Eng-IY-fQ7.text" = "Loop will remind you to change your pod before it expires. You can change this to a time convenient for you.";
+
+/* Class = "UILabel"; text = "Please deactivate the pod. When deactivation is complete, remove pod from body."; ObjectID = "GK7-jb-tyY"; */
+"GK7-jb-tyY.text" = "Please deactivate the pod. When deactivation is complete, remove pod from body.";
+
+/* Class = "UINavigationItem"; title = "Insert Cannula"; ObjectID = "HwT-30-f0y"; */
+"HwT-30-f0y.title" = "Insert Cannula";
+
+/* Class = "UILabel"; text = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site."; ObjectID = "Iuv-5M-bDH"; */
+"Iuv-5M-bDH.text" = "Prepare site. Remove the pod's needle cap and adhesive backing. If pod is OK, apply to site.";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "aNg-mm-Uuy"; */
+"aNg-mm-Uuy.title" = "Pump Setup";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "ack-ra-XH6"; */
+"ack-ra-XH6.title" = "Pump Setup";
+
+/* Class = "UILabel"; text = "Your Pod is ready for use."; ObjectID = "bJ5-iH-fnF"; */
+"bJ5-iH-fnF.text" = "Your Pod is ready for use.";
+
+/* Class = "UILabel"; text = "Reminder"; ObjectID = "ePA-6p-q8C"; */
+"ePA-6p-q8C.text" = "Reminder";
+
+/* Class = "UINavigationItem"; title = "Pod Pairing"; ObjectID = "jVO-Ut-MhL"; */
+"jVO-Ut-MhL.title" = "Pod Pairing";
+
+/* Class = "UITableViewController"; title = "Pump Setup"; ObjectID = "k1Y-x4-m0a"; */
+"k1Y-x4-m0a.title" = "Pump Setup";
+
+/* Class = "UINavigationItem"; title = "Setup Complete"; ObjectID = "nDb-R5-e02"; */
+"nDb-R5-e02.title" = "Setup Complete";
+
+/* Class = "UITableViewSection"; footerTitle = "NOTE: If cannula sticks out, press cancel."; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.footerTitle" = "NOTE: If cannula sticks out, press cancel.";
+
+/* Class = "UITableViewSection"; headerTitle = "Apply POD"; ObjectID = "rcC-ke-lUP"; */
+"rcC-ke-lUP.headerTitle" = "Apply POD";
+
+/* Class = "UILabel"; text = "Label"; ObjectID = "vEc-Km-ewe"; */
+"vEc-Km-ewe.text" = "Label";
+
+/* Class = "UILabel"; text = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing."; ObjectID = "vmF-Dc-3DS"; */
+"vmF-Dc-3DS.text" = "Fill a new pod with insulin. Listen for 2 beeps from the pod during filling. Keep the RileyLink about 6 inches from the pod during pairing.";
+
+/* Class = "UINavigationItem"; title = "Replace Pod"; ObjectID = "yy1-xf-HdR"; */
+"yy1-xf-HdR.title" = "Replace Pod";

Dependencies/rileylink_ios/RileyLink.xcodeproj/project.pbxproj

@@ -880,6 +880,15 @@
 /* End PBXCopyFilesBuildPhase section */
 
 /* Begin PBXFileReference section */
+		19E85E1F273EA8F2000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/OmnipodPumpManager.strings; sourceTree = "<group>"; };
+		19E85E20273EA8F4000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E21273EA8F6000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/MinimedPumpManager.strings; sourceTree = "<group>"; };
+		19E85E22273EA8F6000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E23273EA8F6000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E24273EA8F6000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E25273EA8F6000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E26273EA8F7000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
+		19E85E27273EA94B000CCFAE /* tr */ = {isa = PBXFileReference; lastKnownFileType = text.plist.strings; name = tr; path = tr.lproj/Localizable.strings; sourceTree = "<group>"; };
 		2B19B9871DF3EF68006AB65F /* NewTimePumpEvent.swift */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.swift; path = NewTimePumpEvent.swift; sourceTree = "<group>"; };
 		2F962EBE1E678BAA0070EFBD /* PumpOpsSynchronousTests.swift */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.swift; lineEnding = 0; path = PumpOpsSynchronousTests.swift; sourceTree = "<group>"; xcLanguageSpecificationIdentifier = xcode.lang.swift; };
 		2F962EC01E6872170070EFBD /* TimestampedHistoryEventTests.swift */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.swift; path = TimestampedHistoryEventTests.swift; sourceTree = "<group>"; };
@@ -3201,6 +3210,7 @@
 				fi,
 				"pt-BR",
 				ro,
+				tr,
 			);
 			mainGroup = C12EA22E198B436800309FA4;
 			productRefGroup = C12EA238198B436800309FA4 /* Products */;
@@ -4342,6 +4352,7 @@
 				7D9BF02D2336A2FB005DCFD6 /* fi */,
 				7D9BF0352336A304005DCFD6 /* pt-BR */,
 				7D9BF14D23371407005DCFD6 /* ro */,
+				19E85E21273EA8F6000CCFAE /* tr */,
 			);
 			name = MinimedPumpManager.storyboard;
 			sourceTree = "<group>";
@@ -4366,6 +4377,7 @@
 				7D9BF0302336A2FB005DCFD6 /* fi */,
 				7D9BF0382336A304005DCFD6 /* pt-BR */,
 				7D9BF15123371408005DCFD6 /* ro */,
+				19E85E24273EA8F6000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4414,6 +4426,7 @@
 				7D9BF02F2336A2FB005DCFD6 /* fi */,
 				7D9BF0372336A304005DCFD6 /* pt-BR */,
 				7D9BF15023371408005DCFD6 /* ro */,
+				19E85E23273EA8F6000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4439,6 +4452,7 @@
 				7D9BF02E2336A2FB005DCFD6 /* fi */,
 				7D9BF0362336A304005DCFD6 /* pt-BR */,
 				7D9BF14F23371407005DCFD6 /* ro */,
+				19E85E22273EA8F6000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4463,6 +4477,7 @@
 				7D9BF0332336A2FB005DCFD6 /* fi */,
 				7D9BF03B2336A305005DCFD6 /* pt-BR */,
 				7D9BF15423371408005DCFD6 /* ro */,
+				19E85E25273EA8F6000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4487,6 +4502,7 @@
 				7D9BF0342336A2FB005DCFD6 /* fi */,
 				7D9BF03C2336A305005DCFD6 /* pt-BR */,
 				7D9BF15523371408005DCFD6 /* ro */,
+				19E85E27273EA94B000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4512,6 +4528,7 @@
 				7D9BF05D2336AE58005DCFD6 /* sv */,
 				7D9BF05F2336AE5A005DCFD6 /* vi */,
 				7D9BF14E23371407005DCFD6 /* ro */,
+				19E85E1F273EA8F2000CCFAE /* tr */,
 			);
 			name = OmnipodPumpManager.storyboard;
 			sourceTree = "<group>";
@@ -4536,6 +4553,7 @@
 				C1B9E0FE256AF076008E8B84 /* es */,
 				C1B9E0FF256AF078008E8B84 /* sv */,
 				C1B9E100256AF07B008E8B84 /* vi */,
+				19E85E26273EA8F7000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";
@@ -4560,6 +4578,7 @@
 				7D9BF0322336A2FB005DCFD6 /* fi */,
 				7D9BF03A2336A305005DCFD6 /* pt-BR */,
 				7D9BF15323371408005DCFD6 /* ro */,
+				19E85E20273EA8F4000CCFAE /* tr */,
 			);
 			name = Localizable.strings;
 			sourceTree = "<group>";

Dependencies/rileylink_ios/RileyLink/tr.lproj/Localizable.strings

@@ -0,0 +1,51 @@
+/* The title of the about section */
+"About" = "About";
+
+/* The title of the button to add the credentials for a service */
+"Add Account" = "Add Account";
+
+/* The title of the nightscout API secret credential */
+"API Secret" = "API Secret";
+
+/* The title of the configuration section in settings */
+"Configuration" = "Configuration";
+
+/* The title of the button to remove the credentials for a service */
+"Delete Account" = "Delete Account";
+
+/* The placeholder text instructing users how to enter a pump ID */
+"Enter the 6-digit pump ID" = "Enter the 6-digit pump ID";
+
+/* The title text for the pull cgm Data cell */
+"Fetch CGM" = "Fetch CGM";
+
+/* The placeholder text for the nightscout site URL credential */
+"http://mysite.herokuapp.com" = "http://mysite.herokuapp.com";
+
+/* The title of the Nightscout service */
+"Nightscout" = "Nightscout";
+
+/* The title text for the pump ID config value */
+"Pump ID" = "Pump ID";
+
+/* Title text for section listing configured pumps */
+"Pumps" = "Pumps";
+
+/* The default placeholder string for a credential */
+"Required" = "Required";
+
+/* Title for RileyLink Testing main view controller */
+"RileyLink Testing" = "RileyLink Testing";
+
+/* Title text for button to set up omnipod */
+"Setup Omnipod" = "Setup Omnipod";
+
+/* The title of the nightscout site URL credential */
+"Site URL" = "Site URL";
+
+/* The empty-state text for a configuration value */
+"Tap to set" = "Tap to set";
+
+/* The title text for the nightscout upload enabled switch cell */
+"Upload To Nightscout" = "Upload To Nightscout";
+

Dependencies/rileylink_ios/RileyLinkBLEKit/tr.lproj/Localizable.strings

@@ -0,0 +1,30 @@
+/* Write size limit exceeded error description (1: size limit) */
+"Data exceeded maximum size of %@ bytes" = "Data exceeded maximum size of %@ bytes";
+
+/* Invalid input error description (1: input) */
+"Input %@ is invalid" = "Input %@ is invalid";
+
+/* Recovery suggestion for unknown peripheral characteristic */
+"Make sure the device is nearby, and the issue should resolve automatically" = "Make sure the device is nearby, and the issue should resolve automatically";
+
+/* Timeout error description */
+"Peripheral did not respond in time" = "Peripheral did not respond in time";
+
+/* Not ready error description */
+"Peripheral isnʼt connected" = "Peripheral isnʼt connected";
+
+/* Response timeout error description */
+"Pump did not respond in time" = "Pump did not respond in time";
+
+/* Invalid response error description (1: response) */
+"Response %@ is invalid" = "Response %@ is invalid";
+
+/* Unsupported command error description */
+"RileyLink firmware does not support the %@ command" = "RileyLink firmware does not support the %@ command";
+
+/* Failure reason: unknown peripheral characteristic */
+"The RileyLink was temporarily disconnected" = "The RileyLink was temporarily disconnected";
+
+/* Error description */
+"Unknown characteristic" = "Unknown characteristic";
+