formatting and Grammatical Edits

FreeAPS/Sources/Modules/AlgorithmAdvancedSettings/View/AlgorithmAdvancedSettingsRootView.swift

@@ -109,10 +109,10 @@ extension AlgorithmAdvancedSettings {
                             "The Duration of Insulin Action (DIA) defines how long your insulin continues to lower glucose readings after a dose."
                         )
                         Text(
-                            "This helps the system accurately track Insulin on Board (IOB), avoiding over- or under-corrections by considering the tail end of insulin's effect"
+                            "This helps the system accurately track Insulin on Board (IOB), avoiding over- or under-corrections by considering the tail end of insulin's effect."
                         )
                         Text(
-                            "Tip: It is better to use Custom Peak Time rather than adjust your Duration of Insulin Action (DIA)"
+                            "Tip: It is better to use Custom Peak Time rather than adjust your Duration of Insulin Action (DIA)."
                         )
                     }
                 )
@@ -222,7 +222,7 @@ extension AlgorithmAdvancedSettings {
                         Text(
                             "This prevents lingering insulin effects when your pump is suspended, ensuring safer management of insulin on board."
                         )
-                        Text("Note: Applies to only to pumps with on-pump suspend options.")
+                        Text("Note: Applies only to pumps with on-pump suspend options.")
                     }
                 )
 
@@ -355,7 +355,7 @@ extension AlgorithmAdvancedSettings {
                     VStack(alignment: .leading, spacing: 10) {
                         Text("Default: 130%").bold()
                         Text(
-                            "The Noisy CGM Target Multiplier increases your glucose target when the system detects noisy or raw CGM data. By default, the target is increased by 130% to account for the less reliable glucose readings."
+                            "The Noisy CGM Target Increase raises your glucose target when the system detects noisy or raw CGM data. By default, the target is increased to 130% of your set target glucose to account for the less reliable glucose readings."
                         )
                         Text(
                             "This helps reduce the risk of incorrect insulin dosing based on inaccurate sensor data, ensuring safer insulin adjustments during periods of poor CGM accuracy."

FreeAPS/Sources/Modules/BolusCalculatorConfig/View/BolusCalculatorConfigRootView.swift

@@ -76,7 +76,7 @@ extension BolusCalculatorConfig {
                             "Recommended Bolus Percentage is a safety feature built into Trio. Trio first calculates an insulin required value, which is the full dosage. That dosage is then multiplied by your Recommended Bolus Percentage to display your suggested insulin dose in the bolus calculator."
                         )
                         Text(
-                            "Because Trio utilizes SMBs and UAM SMBs to help you reach your target glucose, this is initially set to below the full calculated amount (<100%) because other AID systems do not bolus for COB the same way Trio does. When SMBs and UAM SMBs are enabled, you may find your current CR results in lows and needs to be increased before you increase this setting closer to or at 100%."
+                            "Because Trio utilizes SMBs and UAM SMBs to help you reach your target glucose and other AID systems do not bolus for COB the same way Trio does, this is initially set to below the full calculated amount (80%). When SMBs and UAM SMBs are enabled, you may find your current CR results in lows and needs to be increased before you increase this setting closer to or at 100%."
                         )
                         Text(
                             "Tip: If you are a new Trio user, it is not advised to set this to 100% until you have verified that your core settings (basal rates, ISF, and CR) do not need adjusting."

FreeAPS/Sources/Modules/CalendarEventSettings/View/CalendarEventSettingsRootView.swift

@@ -40,7 +40,7 @@ extension CalendarEventSettings {
                             "When enabled, Trio will create a customizable calendar event to keep you notified of your current glucose reading with every successful loop cycle."
                         )
                         Text(
-                            "This is useful if you use CarPlay or a variety of other external services that limit the view of most apps, but allows the calendar app"
+                            "This is useful if you use CarPlay or a variety of other external services that limit the view of most apps, but allow the calendar app."
                         )
                         Text(
                             "Once enabled, the available customizations will appear. You can customize with the calendar of your choosing, use of emoji labels, and the inclusion of IOB & COB data."

FreeAPS/Sources/Modules/MealSettings/View/MealSettingsRootView.swift

@@ -210,15 +210,15 @@ extension MealSettings {
                                 )
                             }
                         }
-                        VStack(alignment: .leading, spacing: 5) {
+                        VStack(alignment: .center, spacing: 5) {
                             Text("Fat Conversion").bold()
                             Text("𝑭 = fat(g) × 90%")
                         }
-                        VStack(alignment: .leading, spacing: 5) {
+                        VStack(alignment: .center, spacing: 5) {
                             Text("Protein Conversion").bold()
                             Text("𝑷 = protein(g) × 40%")
                         }
-                        VStack(alignment: .leading, spacing: 5) {
+                        VStack(alignment: .center, spacing: 5) {
                             Text("FPU Conversion").bold()
                             Text("𝑭 + 𝑷 = g CHO")
                         }
@@ -254,7 +254,7 @@ extension MealSettings {
                         VStack(alignment: .leading, spacing: 10) {
                             Text("Default: 60 min").bold()
                             Text(
-                                "The Fat Protein Delay setting defines the time between when you log fat and protein and when the system starts delivering insulin for the Fat-Protein Unit Carb Equivalents (FPUs)."
+                                "The Fat and Protein Delay setting defines the time between when you log fat and protein and when the system starts delivering insulin for the Fat-Protein Unit Carb Equivalents (FPUs)."
                             )
                             Text(
                                 "This delay accounts for the slower absorption of fat and protein, as calculated by the Warsaw Method, ensuring insulin delivery is properly timed to manage glucose spikes caused by high-fat, high-protein meals."

FreeAPS/Sources/Modules/SMBSettings/View/SMBSettingsRootView.swift

@@ -65,7 +65,7 @@ extension SMBSettings {
                                 "When the carb on board (COB) forecast line is active, enabling this feature allows Trio to use Super Micro Boluses (SMB) to deliver the insulin required."
                             )
                             Text(
-                                "Note: If this is enabled and the criteria is met, SMBs could be utilized regardless of other SMB settings being enabled or not."
+                                "Note: If this is enabled and the criteria are met, SMBs could be utilized regardless of other SMB settings being enabled or not."
                             )
                         }
                     )
@@ -92,7 +92,7 @@ extension SMBSettings {
                                 "Enabling this feature allows Trio to deliver insulin required using Super Micro Boluses (SMB) at times when a manual Temporary Target under \(state.units == .mgdL ? "100" : 100.formattedAsMmolL) \(state.units.rawValue) is set."
                             )
                             Text(
-                                "Note: If this is enabled and the criteria is met, SMBs could be utilized regardless of other SMB settings being enabled or not."
+                                "Note: If this is enabled and the criteria are met, SMBs could be utilized regardless of other SMB settings being enabled or not."
                             )
                         }
                     )
@@ -119,7 +119,7 @@ extension SMBSettings {
                                 "Enabling this feature allows Trio to deliver insulin required using Super Micro Boluses (SMB) for 6 hours after a carb entry, regardless of whether there are active carbs on board (COB)."
                             )
                             Text(
-                                "Note: If this is enabled and the criteria is met, SMBs could be utilized regardless of other SMB settings being enabled or not."
+                                "Note: If this is enabled and the criteria are met, SMBs could be utilized regardless of other SMB settings being enabled or not."
                             )
                         }
                     )
@@ -147,7 +147,7 @@ extension SMBSettings {
                                 "Enabling this feature allows Trio to deliver insulin required using Super Micro Boluses (SMB) when glucose reading is above the value set as High BG Target."
                             )
                             Text(
-                                "Note: If this is enabled and the criteria is met, SMBs could be utilized regardless of other SMB settings being enabled or not."
+                                "Note: If this is enabled and the criteria are met, SMBs could be utilized regardless of other SMB settings being enabled or not."
                             )
                         }
                     )
@@ -181,7 +181,7 @@ extension SMBSettings {
                             "Enabling this feature allows Trio to deliver insulin required using Super Micro Boluses (SMB) when a manual Temporary Target above \(state.units == .mgdL ? "100" : 100.formattedAsMmolL) \(state.units.rawValue) is set."
                         )
                         Text(
-                            "Note: If this is enabled and the criteria is met, SMBs could be utilized regardless of other SMB settings being enabled or not."
+                            "Note: If this is enabled and the criteria are met, SMBs could be utilized regardless of other SMB settings being enabled or not."
                         )
                         Text(
                             "Warning: High Temp Targets are often set when recovering from lows. If you use High Temp Targets for that purpose, this feature should remain disabled."
@@ -354,10 +354,10 @@ extension SMBSettings {
                     VStack(alignment: .leading, spacing: 10) {
                         Text("Default: 50%").bold()
                         Text(
-                            "Once the total insulin required is calculated, this safety limit specifies what share of the total insulin required can be delivered as an SMB."
+                            "Once the total insulin required is calculated, this safety limit specifies what percentage of the insulin required can be delivered as an SMB."
                         )
                         Text(
-                            "Due to SMBs occurring every 5 minutes, it is important to set this value to a reasonable level that allows Trio to safely zero temp should dosing needs suddenly change. Increase this value with caution."
+                            "Due to SMBs potentially occurring every 5 minutes with each loop cycle, it is important to set this value to a reasonable level that allows Trio to safely zero temp should dosing needs suddenly change. Increase this value with caution."
                         )
                         Text("Note: Allowed range is 30 - 70%")
                     }